PAM Commands
Every player command, grouped by what it does. Click a command to copy it.
!pam fleet, !pam ships, !pam status, !pam queue or a long list, and PAM opens a readable report with a Close button. One-line answers, such as starting or stopping a ship, stay in chat.
π How to read a command
| Part | Meaning |
|---|---|
<value> | Required. Replace it with your value. |
[value] | Optional. Leave it out if it does not apply. |
"value with spaces" | Use quotes when a name or GPS contains a space. |
"GPS:Name:X:Y:Z:" | A GPS must always be in quotes. |
[grid] | Optional when you are sitting in the ship, or it is your only active ship. |
[profile] | Optional. It changes how the job runs; without it PAM uses defaults. |
Commands are lower case. The order in !pam start is always job, then profile, then ship.
"Thorium Test" is a saved job; "Miner Test" is a profile; "Sens Miner" is the ship's grid name; "sens station" is the station's grid name; "PAM Dock 1" is a connector.
βΆοΈ Start and stop
Forms: !pam start <job> <profile> <grid> or !pam start <gps> [ores] [grid]; !pam stop|resume|home [<grid>].
| Command | What it does |
|---|---|
!pam start "<gps>" [ores] [grid] | Mines at a GPS. Leave ores out for the whole asteroid. The job is called βJob on β¦β. |
!pam start "<job name>" [profile] [grid] | Starts one of your saved jobs. Add the profile to choose how, then the ship to run it. Without a profile it uses the defaults. |
!pam group "<job name>" <profile> "<grid one,grid two>" | Starts a saved job on several ships. Each gets its own place. The profile is required. |
!pam stop [grid] | Stops the ship and gives it back to you. The job ends. |
!pam resume [grid] | Sends a waiting ship back to work. |
!pam home [grid] | Returns the ship to where its job began, or to its station. |
iron,nickel.
The order is job, profile, ship.
!pam start "Thorium Test" "Miner Test" "Sens Miner" means the job βThorium Testβ, the profile βMiner Testβ, on the ship βSens Minerβ. A profile is not a job, and a ship is not a GPS.
!pam start "GPS:Nickel rock:1000:2000:3000:" nickel
A complete first job: a GPS in quotes, then the ore.
π§© Common setups, with exact commands
Universal forms:
!pam profile set <profile> station <station grid>
!pam profile set <profile> dock <connectors|any|none>
!pam job new <job> <gps> [ores]
!pam start <job> <profile> <grid>
!pam group <job> <profile> "<grid one,grid two>"
Angle brackets are placeholders; quote names with spaces. A GPS is always quoted.
For these examples: job "Thorium Test"; profile "Miner Test"; ship grid "Sens Miner"; station "sens station"; warship grids "Warship One" and "Warship Two".
!pam job new, then start the saved job with the profile.
Miner that docks, unloads and recharges by itself
!pam stations
sens station: PAM Dock 1, PAM Dock 2 (in use)
!pam profile new "Miner Test"
!pam profile set "Miner Test" role miner
!pam profile set "Miner Test" cargo 90
!pam profile set "Miner Test" station "sens station"
!pam profile set "Miner Test" dock any
!pam job new "Thorium Test" "GPS:thor:35875.86:12311.12:26887.91:" Thorium
!pam start "Thorium Test" "Miner Test" "Sens Miner"
!pam stations gives the grid name for station and the connector names for dock. The ship fills to 90%, flies to sens station, docks, unloads, charges to 95%, undocks and returns to the rock.
Which connector?
dock anyβ nearest free connector of the right size. If any connector at the station has[PAM]in its name, only those are used.dock "PAM Dock 1,PAM Dock 2"β only those connectors. Names are comma-separated and must match!pam stations.dock noneβ clear the list and go back to any free connector.- Small ships need small connectors, large ships need large ones. Make one profile for each size if your fleet has both.
Warship escort groups β and the mayday question
For this example: profile "Guard"; job "Guard Duty"; miner grid "Sens Miner"; warship grids "Warship One" and "Warship Two".
Syntax:
!pam profile set <profile> role escort
!pam job escort <job> <guarded grid>
!pam group <job> <profile> "<grid one,grid two>"
!pam gps "Sens Miner"
!pam profile new "Guard"
!pam profile set "Guard" role escort
!pam profile set "Guard" manoeuvrespeed 30
!pam job new "Guard Duty" "GPS:Sens Miner:1000:2000:3000:"
!pam job escort "Guard Duty" "Sens Miner"
!pam group "Guard Duty" "Guard" "Warship One,Warship Two"
The escort's GPS is only there because every saved job needs one; the role uses the guarded ship. Set the warships' AI blocks in the ship's control panel; chat has no AI-setting command. For patrols, the job needs at least two GPS points; !pam job new saves one, so a Torch-only patrol is limited to what the saved job already holds.
π Job queue
Forms: !pam queue add <job> [<profile>] [<grid>]; !pam queue [<grid>]; !pam queue skip <number> [<grid>]; !pam queue clear [<grid>].
A ship can hold several saved jobs and work through them one after another. When the job it is running finishes, the next one starts by itself.
| Command | What it does |
|---|---|
!pam queue add "<job name>" [profile] [grid] | Adds a saved job to the end of the ship's queue, and starts it now if the ship is idle. |
!pam queue [grid] | Shows the jobs waiting, and what is holding the next one up. |
!pam queue skip [number] [grid] | Removes one waiting job, counting from 1. |
!pam queue clear [grid] | Empties the queue. The job running now keeps going. |
!pam queue says why. Move the ship, skip that job, or clear the queue. !pam stop also empties the queue.
!pam queue add "Thorium Test" "Miner Test" "Sens Miner"
Queues a saved job. Repeat with another job to build a run of rocks.
π Shuttle routes
Forms: !pam shuttle add <job> <station grid>; !pam shuttle set <job> <stop> <setting> <value> [kg]; !pam shuttle list|clear <job>; !pam shuttle trips <job> <number>.
A shuttle docks at a list of stations, does each stop's work, then moves on. It repeats, or stops after a number of trips. The job's profile must have role shuttle.
| Command | What it does |
|---|---|
!pam shuttle add "<job>" "<station>" | Adds a stop, and makes the job if it is new. |
!pam shuttle list "<job>" | Shows the route and each stop's rules in a report window. |
!pam shuttle set "<job>" <stop> <setting> <value> [kg] | Changes one rule: leave, minutes, wait, unload or load. |
!pam shuttle trips "<job>" <number> | How many times the route runs. 0 is until stopped. |
!pam shuttle clear "<job>" | Removes every stop. |
leave empty|full|time|loaded, minutes <n> for the time rule, wait <n> as the most minutes to hold the dock (0 is no limit), unload on|off, and load "<item>" [kg] where 0 takes as much as fits and none clears it.
!pam shuttle set "Ore Run" 1 load "Iron" 50000
A complete example: carry iron from an outpost to a base, twice.
!pam shuttle set "Ore Run" 2 leave empty
The base empties the shuttle before it goes back for the next load.
π Your ships
Forms: !pam status|stop [<grid>]; !pam ships; !pam jobs; !pam fleet; !pam gps [<grid>]; !pam stations.
| Command | What it does |
|---|---|
!pam ships | Lists your active ships. |
!pam jobs | Every job and its state, in a readable report window. |
!pam status [grid] | Shows the ship's job, cargo, power and health. |
!pam fleet | A report of every job, a block for each ship. |
!pam gps [grid] | Adds the ship's position to your GPS list. |
!pam stations | Lists the grids and connectors where your ships can dock. |
!pam about | Shows PAM's version. |
πΎ Saved jobs
Forms: !pam job new <job> <gps> [ores]; !pam job list|show|delete <job>; !pam job rename|ores|comment|escort <job> ....
Saved jobs are kept on the server. A saved job can be started with !pam start "<job name>"; add the profile to use its settings. A job made with !pam job new has no profile attached, so without the profile it uses the defaults.
| Command | What it does |
|---|---|
!pam job new "<name>" "<gps>" [ores] | Saves a new job. |
!pam job list | Lists your saved jobs. |
!pam job show "<name>" | Shows one job. |
!pam job rename "<name>" "<new name>" | Renames a job. |
!pam job comment "<name>" "<comment>" | Sets the job's comment. |
!pam job ores "<name>" <ores> | Changes the job's ores. |
!pam job escort "<name>" <grid> | Sets the ship that an Escort job guards. |
!pam job delete "<name>" | Deletes a job. |
π§ Profiles
Forms: !pam profile new <profile>; !pam profile set <profile> <setting> <value>; !pam profile list|show|delete <profile>.
A profile sets how a ship works: role, speeds, cargo, station, return rules. A change reaches ships using it immediately.
| Command | What it does |
|---|---|
!pam profile new "<name>" | Makes a new profile. |
!pam profile list | Lists your profiles. |
!pam profile show "<name>" | Shows one profile and its settings. |
!pam profile set "<name>" <setting> <value> | Changes one setting. |
!pam profile delete "<name>" | Deletes a profile. |
Profile settings
| Setting | Values | Meaning |
|---|---|---|
role | miner, shuttle, battleship, fighter, scout, patrol, escort | The ship's role. Taxi and Grinder are accepted but not built yet. |
cargo | 0β100 | How full the cargo gets before the ship leaves. |
miningspeed | m/s | Highest speed while drilling. 0 lets PAM choose. |
manoeuvrespeed | m/s | Highest speed to and from the rock. 0 lets PAM choose. |
dockingspeed | m/s | Highest speed near a dock. 0 lets PAM choose. |
radius | 0β25 m | Drill radius. 0 uses the game's size. |
overlap | 0β50 % | How much neighbouring tunnels overlap. |
clear | m or off | Clear stone without keeping it, until this many metres before the ore. |
minjump | km | End the job and go home when jump range falls below this. |
returnafter | minutes | Go home this long after reaching the job. Combat roles only. |
lowammo | % | Go home when only this share of weapons has ammo. |
lowshield | % | Go home when the shield falls to this. |
lowhull | % | Go home when the hull falls to this. |
lowpower | % | Go home when stored power or fuel falls to this. |
evade | km | How far an evasive jump goes. |
logores | on / off | Log ore found by the ship's ore detector. |
returnenemy | on / off | Go home when an enemy is seen. |
returnore | on / off | Go home when the ore detector finds ore. Combat roles only. |
jumps | on / off | Jump instead of flying when the ship can. |
station | grid name or none | Where the ship docks to unload and charge. |
dock | connector names or any | Which connectors at the station the ship may use. |
More detail on roles, stations and AI blocks: PAM Profiles.
logores and returnore; its range sets how far those look.
π Alerts
Forms: !pam alerts; !pam alerts clear|on|off; !pam alerts mute|unmute <kind>.
| Command | What it does |
|---|---|
!pam alerts | Shows your 15 newest alerts. |
!pam alerts clear | Deletes your alerts. |
!pam alerts on | Shows new alerts in chat. |
!pam alerts off | Stops alerts in chat. !pam alerts still lists them. |
!pam alerts mute <kind> | Stops one kind in chat. |
!pam alerts unmute <kind> | Shows that kind in chat again. |
Kinds: Enemy, Damage, Split, Limit, Blocked, Job, Lag and Admin.
π Ores
Forms: !pam ores; !pam ores clear.
| Command | What it does |
|---|---|
!pam ores | Shows your 15 nearest logged ore deposits, with their GPS. |
!pam ores clear | Deletes your logged ore. |
A ship logs ore only when Log ores is on in its profile and it has a working ore detector.
π οΈ Admin and flight tests
Forms: !pam admin status|ships|stop|stopplayer|pause|resume ...; !pam test hold|turn|move|status|release [<grid>].
Admin
| Command | What it does |
|---|---|
!pam admin status | Shows sim speed, any pause, and how many ships work. |
!pam admin ships [player] | Lists all active ships, or one player's. |
!pam admin stop <grid> | Stops any player's ship. |
!pam admin stopplayer <player> | Stops all ships of one player. |
!pam admin pause | Stops every PAM ship on the server where it is. |
!pam admin resume | Ends the admin pause. The ships go back to work. |
Flight tests
| Command | What it does |
|---|---|
!pam test hold [grid] | PAM takes the grid and holds it still. |
!pam test turn <yaw> [pitch] [roll] [grid] | Turns the grid by these angles. |
!pam test move <forward> [right] [up] [grid] | Moves the grid by these distances. |
!pam test status [grid] | Shows the test's state. |
!pam test release [grid] | Gives the grid back. |
Flight tests work on any grid by name, including other players' grids. Use them carefully.